Bones Motor Sports LLC
My Account:  Log In

0 item(s) in cart/ total: $0  view cart

KO Propo RSx3-Power Servo

Part Number KOP30124
review 0 Review(s)
KO Propo RSx3-Power Servo
KO Propo RSx3-Power Servo
Email a friend Email a friend
Review this item Review this item
Your Price:  
Out of Stock.
The aluminum top case support the stable ‘Holding Power’. The case is machined after anodizing, creating a sharp design and beautiful edge line of the case. By shaving off the inside of the case to extremity, while securing sufficient strength, the case is made lighter than the former aluminum case.The black wire servo leads with cool appearance provides suitable softness for installation, while securing necessary current capacity.

HCS (High speed Communcation System) is the new high speed communication system between the receiver to the servo. The HCS mode shortens communication time of the signal which is compressed. HCS compatible servos is changing mode automatically by signal from receiver. So HCS compatible servos can use with all receivers.  If you want to use servos by HCS, please use with HCS compatible receivers.

Installed preset settings

The following factory MODEL settings are pre-installed. 
You can chenge setting by Servo Model Selector

Model1: Standard setting(All category)
         2:"Cody King"setting(1/8GP - Off road)
         3:2016Japan national-turf(1/10EP Off-road)
         4:Dirt(1/10EP Off-road)
         5:For Technical Circuit(All category)

*Model1 has been selected in factory setting.


Torque type servo
Torque:31.6Kg-cm Speed: 0.11sec/60deg (@7.4V)
Torque:26.3Kg-cm Speed: 0.13sec/60deg (@6.0V)

Dimensions: 41x38x20cm(Standard size)
Weight: 65.5g
Operating voltage:6.0 to 7.4V(Lipo,Life,Ni-MH)
The hard alumite aluminum gear
Core-less motor
Dual bearings
The hard servo gear shaft
The aluminum heat shink middle case
Gold plated connector
Black cable
HCS Compatible

Recommend category
  1/8 Off road, 1/8 On road, 1/8GT.